Register The Handset - Uniden WDECT WDECT3315 Owner's Manual

rEgiSTEr ThE hanDSET

If you purchase an extra handset, you need to register the handset to
the base before use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was
assigned at the factory, which has #1 or #2 in the
display (#2 for models that have two handsets in
packaging). When you register additional handset to
the base, the handset ID will be assigned.
1) Before registering the extra handset,
the battery pack must be charged for
15-20 hours.
2) Place the extra handset in the main
base unit to begin registration.
3) While the handset is registering,
Handset Registering will appear in the
LCD.
When Registration Complete is
displayed, the handset has been
registered to the base.
If Registration Failed appears, please
try these steps again.
Place handset
on main base
to register
1
Charge the handset
Extra Handset
for 15-20 hours.
Charger
2
Extra Handset
Place the extra handset
in the main base to
register.
Main Base
Regi s tra ti o n
C o m pl et e
Extra Handset
+
3
Main Base
• An extra handset
can be registered
when the main
base is in standby
mode.
• Standby Mode -
The handset is
not in use and
not been pressed.
4
Charger
has
[ 3 ]