Phonebook; Storing Phone Numbers, Names, Distinctive Rings, And Speed Dial - Uniden WDECT WDECT3315 Owner's Manual

• Your phone has 100
memory locations for
Caller ID messages
or stored Phonebook
numbers.
• Selecting a speed
dial location where
a number is already
stored releases the
old number's speed
dial setting. The new
number will be stored
in the speed
dial location.
• When the memory is
full, you will hear a
beep and Memory Full
appears. You cannot
store names and
numbers.
• The pause key counts
as one digit. Pressing
redial/pause
more than once
increases the length
of the pause between
numbers. Each pause
represents a 2
second pause.
[ 26 ]

phOnEbOOk

The Phonebook allows you to dial a number using just a few key presses. Your
phone stores names/numbers in the phonebook memory location, and you can
search names in alphabetical order. You have a total of 100 locations that can be
used for the phonebook (including the speed dials) and Caller ID messages.

STOring phOnE nuMbErS, naMES, DiSTinCTivE ringS, anD SpEED Dial

1) When the phone is in standby mode,
press phonebook.
The handset displays the following items:
(1st line) The number of the phonebook locations
used (2nd line) How to search (press the number
keypad, /vol/ or
(3rd line) How to enter the storing operation (press
the key)
2) Press , Store/Edit Name appears.
3) Enter the name (up to 16 characters) by using
the number keypad (see the "Steps for Entering
Names and Special Characters" on page 28).
If a name is not required, go to step 4. <No
Name> will be used as the name.
4) Press to store the name,
Store/Edit No. appears.
5) Press the number keypad to enter the phone
number (up to 20 digits), press
the number.
/vol/ )
to store
Phonebook :100
Search [A-Z/ / ]
Store [SELECT]
Store/Edit Name
Movies
Store/Edit No.
8007303456