Table of Contents
Advertisement
[ 10 ]
Global Setup
If you change one of the Global settings, you change the setting for all additional
handsets. Only one handset can change Global settings at a time.
Submenu name
Name Tag (POP ID) Display the stored name with the Caller ID telephone number, if the
displayed Caller ID telephone number is exactly the same as
(Default is on)
a number stored in the phone book (see page 15).
Insert 0
Add "0" or "00" to the number, when you receive the Caller ID
(New Zealand only) message (see page 15).
Day & time
Set the day and time of your display (see page 15).
Dial Mode
Set the dial mode to tone or pulse (see page 16). Most phone
systems use tone dialing, which send DTMF tone through
(Australia only)
phone line. The default is tone dialing.
(Default is tone)
Depends on your dialing system, set the dial mode.
Copy Phonebook
Allow you to transfer the phonebook data stored in one handset to
another handset (see page 16).
System Reset
System Reset is used to clear the handset's ID from the main base unit,
or the base ID from the handset.
Submenu name
Deregister HS
Clear the handset ID from the base. Use this option, for example, when
you change the digital security code (see page 17).
Replacing Base Clear the base ID. Use this option, for example, if you wish to
deregister the base to use the handset with
another base of the WDECT3315 and WDECT3355 series (see page 17).
Description
Description
Hide quick links:
Advertisement
Table of Contents
