Replacing The Base - Uniden WDECT2315+2 Quick Start Manual

UP409ZH (WDECT2315-2) OM 12/22/05
Call Transfer Feature
1) During a call, press
2) Select a handset to transfer the call within 10
seconds. (Refer to step 2 in the intercom section on
page 43).
The call will automatically be placed on hold, and an
intercom tone sounds.
To cancel the transfer, press
3) On the receiving handset, to answer the page, press
/transfer/int'com. If you turn AutoTalk on, pick up the handset from the cradle. If
Anykey Answer is On, press any number key,
mode is activated, but the caller is still on hold.
4) To transfer the call, press
the receiving handset.

REPLACING THE BASE

If the base unit is replaced with a different base from this same series of cordless
models, you must clear handset (s) and base identification numbers. To do this, select
For model number
verification, visit "System Reset" from handsets display menu option list (see page 19 for guidance).
our website
www.uniden.com.au
or www.uniden.co.nz
[ 44 ]
3:29 PM Page 44
/transfer/int'com.
or
on the initiating handset, and press
Get other manuals https://www.bkmanuals.com
Hold,to transfer
Handset #2
Handset #3
speaker on the initiating handset.
or
, or . The intercom
on