Using One Touch Voice Mail Access - Uniden WDECT WDECT3315 Owner's Manual

uSing OnE TOuCh vOiCE Mail aCCESS

If you subscribe to voice mail service, you can use your phone to access your
voice mailbox. The new message LED flashes whenever you have messages
waiting in your voice mailbox. Just program the handset with your access
number, and you can get your messages at the touch of a button on the
handset. (The voice mail service provider will supply you with the access
number. This number may be simply a phone number. Refer to the provider's
literature).
• To program or delete your Voice Mail Access Number, See
page 12.
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your
mailbox with the touch of a button. When you have messages, simply pick up
the handset and press
or it has been deleted, when you press the
store number press [MENU] appears and you will hear a beep. The phone
returns to standby mode.
Voice Mail Access
The new message LED on the handset is designed to work with your voice
mail service provided by your local telephone company. The LED flashes
when you have new incoming messages in the voice mail service. You may
need to occasionally reset the indicators if they remain on after you've
retrieved your messages. To reset the indicators, when the phone is in
standby mode press and hold
(about 5 seconds).
. If you have not entered the access number
, No Number Stored To
on the base until the paging sound stops
• You must
subscribe to voice
mail service from
your telephone
company in order
to use this feature.
The voice mail
service company
will provide you
with the access
number.
• Voice Mail Access
Numbers :
Australia
Message Bank :
125101
Home Messages:
101
New Zealand
Call Minder :
083210
[ 25 ]