Uniden Data 2000 Wireless CDPD PC Card Manual page 92

Uniden Data 2000 Wireless CDPD PC Card
AT Command Syntax Description of Command
AT IP #
AT NEIn d.d.d.d
AT PASSWORD "new
password" "new
password" **
AT PREFER
<1><2><3><4>
AT REG <1><0>
AT SPI n
<REQ><PREF><EXCL>
<DEL>
AT SPNI n
<REQ><PREF><EXCL>
<DEL>
AT VERBOSE <0><1> or Disable/enable verbose AT
AT V <0><1>
AT WASI n <REQ>
<PREF><EXCL><DEL>
D-10
Set the active NEI(# = number from 1 to 10)
Response: OK
Set NEI n (n = from 1 to 10). 0 to 255.
Response: OK
Change the current password. This requires
a logon
Response: OK
Set the side preference (1 = Side A only;
2 = Side B only; 3 = Side A is scanned first,
then Side B ; 4 = Side B scanned first then
Side A). Contact your service provider to
determine which setting they provide.
Response: OK
Set Auto-Registration Mode
(Enabled/Disabled).
Response: OK
Set the Service Provider ID (SPI) preference
as either request/preferred/exclude/delete.
Login required
Response: OK (Password required)
Set the Service Provider Network ID (SPNI)
preference, as either
request/preferred/exclude/delete.
Login required.
Response: OK
responses. Login required.
Response: OK
Set preference for the WASI number as
either request/preferred/exclude/delete.
Login required.
Response: OK