System Table - Uniden Data 2000 Wireless CDPD PC Card Manual

Uniden Data 2000 Wireless CDPD PC Card
Note: You can type in the command AT RESETCFG MDT or
AT&F0 followed by the command AT SAVECFG UDT or
AT&W0, at any time, to reset the UDT to the factory default state.
Important: Editing the UDT does not require
a password.
D.2 System Table
The System Table contains specific configuration parameters which are
preserved during the power cycle. Unlike settings in the modem's
default value tables (MDT, SPDT, UDT), these values cannot be
restored to their original settings once they have been changed.
The following table lists all of the configuration parameters stored in
the System Table:
Settings
Boot Version
SW Version
HW Version
EID Parameter
NEI1
NEI2
NEI3
NEI4
NEI5
NEI6
NEI7
NEI8
NEI9
NEI10
Antenna
Flow Control
Verbose
Echo
D-4
Default Values
Current Version
Current Version
Current Version
12 Hex Characters
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
2
1
1
1