Table of Contents
Advertisement
Uniden Data 2000 Wireless CDPD PC Card
7. Select the Server tab.
8. Select SLIP: Unix Connection.
9. Deselect Log on to network.
10. Click TCP/IP Settings....
11. From SLIP TCP/IP settings dialog box, enter the IP Address
provided by your CDPD carrier.
12. If you have been given the address of a Domain Name Server
(DNS), select Name server addresses. Enter the address as
your Primary DNS.
Note: A DNS is needed to access sites by name, e.g.
www.uniden.com.
13. Deselect Use IP header compression.
14. Select Use default gateway on remote network.
15. Click OK twice.
Uniden Data 2000 Installation and Operation Manual
2-27
Advertisement
Table of Contents
