Using Windows Ce Remote Networking; Installing Remote Networking; Connecting To The Cdpd Network - Uniden Data 2000 Wireless CDPD PC Card Manual

Uniden Data 2000 Wireless CDPD PC Card

2.10 Using Windows CE Remote Networking

To use your Uniden Data 2000 Modem with Windows CE Remote
Networking, take the following steps:

2.10.1 Installing Remote Networking

1. From the Start, click Programs. Click Communication.
Click Remote Networking.
2. In the Remote Networking window, double-click Make
New Connection.
3. Type UD2000 in the Type a name for the connection and
select Dial-up Connection.
4. Click Next.
5. Select UNIDEN-UD2000PC_CARD for the Select a modem:
6. Click TCP/IP Settings. Deselect Use software compression
and Use IP header compression.
7. Click Name Servers tab.
8. Deselect Server-assigned addresses and enter the IP
address of the DNS provided by your CDPD carrier. Then,
click OK.
9. Click Next.
10. Enter your Country code, Area code and enter 0 for the
Telephone number. Select Force local.
11. Click Finish.

2.10.2 Connecting to the CDPD Network

To Connect to the CDPD Network, take the following steps:
1. Double click the new icon you created in the previous section.
2. Leave User Name, Password and Domain Blank.
Then, click Connect.
A Window should appear, displaying the progress of your connection.
Within a few seconds, the connection display should show a remote
networking connection has been established.
Uniden Data 2000 Installation and Operation Manual 2-53