Table of Contents
Advertisement
Uniden Data 2000 Wireless CDPD PC Card
AT Command Syntax
AT ENCR?
[CAT][MDT][UDT][SPDT] particular default table.
AT FC?
AT HWVER? or ATI0
AT IP?
[CAT][UDT][MDT][SPDT] particular default table.
AT NEIn?
AT PREFER?
[CAT][UDT][MDT][SPDT] default table. Side A includes channels
Uniden Data 2000 Installation and Operation Manual
Description of Command
Read Data Encryption Mode from a
(If the option is not specified, the CAT will
be used as the default table.)
Response: Encryption Flag 0 or
Encryption Flag 1
Encryption Flag 0 means encryption is off,
Encryption Flag 1 means is on.
Read flow control mode from the
System Table.
Response: Flow control mode 0,
Flow control mode 1
Flow control mode 0 means flow control is
off, Flow control mode 1 means flow
control is on.
Read the hardware version of the Modem
from the System Table.
Response: U D 1000 n.n
Read the active NEI number from a
(If the option is not specified the CAT will
be used as the default table.)
Response: Active IP n (n = from 1 to 10)
Read NEI n (n = from 1 to 10) from the
System Table
Response: NEIn ddd.ddd.ddd.ddd
Read the side preference from a particular
1-333, 667-716, and 991-1023.
Side B includes channels 334-666
and 717-799.
(If the option is not specified the CAT will
be used as the default table.)
Response: Side Preference n
D-7
Advertisement
Table of Contents
