Setting Your Outgoing Message (Ogm) - Uniden XCA650 Instruction Manual

Base Operation
6
1.
Press .
The speaker beeps, and the
Time and Day Stamp is
announced.

Setting Your Outgoing Message (OGM)

When you receive a call, the Answering System answers and automatically
plays either a preset message or your personal Outgoing Message.
Preset Messages
The XCA650 has two messages programmed in its memory. If the
REC TIME/ANN/4/1 switch is in either the four or one position, the first
preset message below plays. Incoming messages are limited to four or one
minute respectively. If the switch is set in the left position, (i.e., the
"Announce Only" position) the second message below plays, and no
incoming messages are recorded.
Hello. No one is available to take your call. Please leave your message
after the tone.
Hello. No one is available to take your call.
Note: If the REC TIME/ANN/4/1 switch is in the "Announce Only" position, the
Message Counter LED displays an A when the system is in Standby.
46