Table of Contents
Advertisement
The paging feature does
not work when the phone is
in use.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone
you can manually change the phones channel for
clear operation. Interference can come from
appliances or other phones in your home. This
function works only when the phone is in use.
The
button on the handset allows you to
chan
choose between factory set channels (10 AUS/25NZ).
During the course of a conversation, if you hear static or noise which makes it
difficult to hear, press
changing to another channel.
USING THE PAGE/FIND FEATURE
The Page/Find feature sends a signal from the base to the handset causing it to
beep. This is useful for locating the handset when it is away from the base. To use
this feature, press
page/find
On the handset press any key (except talk button) or press page/find button on
the base to end the page.
TRAVELLING OUT OF RANGE
When you begin to move too far from the base, you will first hear a clicking
sound. As you travel further out of range, the voice transmission will begin to
break up. If you pass the range limits of the base, your call will terminate.
. The
LED flashes, indicating the phone is
chan
talk
on the base. The handset beeps for 60 seconds.
17
Advertisement
Table of Contents
