Table of Contents
Advertisement
XS210.Qx
10/6/03 5:27 PM
Page 7
ADJUSTING THE RINGER AND EARPIECE VOLUME
Ringer tone
When the phone is in standby mode, pressing the
handset selects the handset ringer tone. "Press
tone. While the first tone is still ringing, press
second tone. Repeat process to toggle between the two tone options."
Earpiece volume
The handset earpiece volume settings (Low, Medium and High) can only be
adjusted during a call. Press the
Medium and High. When you hang up, the phone keeps the last volume
setting selected.
Ringer mute
The
key can be used to temporarily mute the ringer tone. When the
handset is off the base and the phone is ringing, press the
the ringer tone will be temporarily silenced. The call will not be answered,
and the ringer tone will return to normal starting with the next incoming
call.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base
unit, noise increases. If you pass the range limits of the base unit, your call
will terminate within 1 minute.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually
change the phone's channel for clear operation. This function works only
when the phone is in use.
talk/batt low LED flashes, indicating the phone is
Press
. The
changing to another channel. There are twenty channels to choose from.
PAGE
To locate the handset (while it's off the base), press
The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key,
base or return the handset to the base.
key on the
to listen to the first
again to hear the
key repeatedly to select Low,
key and
on the base.
on the
6
Advertisement
Table of Contents
