Table of Contents
Advertisement
XS210.Qx
10/6/03 5:27 PM
Do not attempt to service
this unit yourself. Servicing
must be performed by
qualified personnel.
Page 10
TROUBLESHOOTING
If your cordless telephone is not performing to your expectations, please try
these simple steps.
Symptom
• Make sure the AC adapter is plugged into the base
The status
LED won't illuminate when
• Make sure the handset is properly seated in the
the handset is placed
in the base.
• Make sure that the charging contacts on the
• Move the handset and/or base to a different
The audio sounds weak
and/or scratchy.
• Press
• Check both ends of the telephone line cord.
Can't make or receive
• Make sure the AC adapter is plugged into the base
calls.
• Make sure that the base antenna is in the vertical
• Disconnect the AC adapter for a few minutes, then
• Change the digital security code (See page 8).
• Make sure that the handset is not too far from the
• The battery pack may be weak. Charge the battery
Handset doesn't ring or
receive a page.
• The handset may be too far away from the base.
• Place the base away from appliances or metal
• Change the digital security code (See page 8).
• Keep the handset away from microwave ovens,
Severe noise
interference
• Move to another location or turn off the source of
• Return to your local service agent immediately.
Your phone has been
exposed to moisture or
liquid
• www.uniden.com.au (AUSTRALIA) or
If you still have
• www.uniden.co.nz (NEW ZEALAND)
a problem
Suggestion
and a wall outlet.
base.
handset and on the base are clean.
location away from metal objects or appliances
and try again.
to help eliminate background
noise.
and a wall outlet.
position.
reconnect it.
base.
for 15-20 hours.
objects.
computers, remote control toys, wireless
microphones, alarm systems, intercoms, room
monitors, fluorescent lights, and electrical
appliances.
interference.
9
Advertisement
Table of Contents
