Installing The Telephoneon A Desk Or Tabletop - Uniden XC630 Operating Manual

Installing the Telephone on a Desk or Tabletop
~~.
~
1.
9VDC
INPUT JACK
TEL LlNE~
Place the Base Unit on a desk or tabletop, and plug one end of the
Telephone Line Cord (supplied) into the "TEL LINE" jack on the Base.
2.
Plug the other end of the Telephone Line Cord into the telephone
socket.
3.
Plug the AC Adaptor cord into the 9Y DC input jack on the Base Unit.
(Note: Use only the AC Adaptor supplied with the XC630/633.)
4.
Plug the AC Adaptor into a standard 230/240Y AC wall outlet.
(Note: The AC wall outlet should be switched on at all times.)
5.
Route the power cord where it will not create a trip hazard, or where it
could become chafed and create a fire or other electrical hazards.
6.
Extend the Base Antenna fully.
7.
For table-top operations, you can improve the stability of the base unit
by attaching the (optional) desktop support.
15