Usingthe Flashbutton; Settingthe Handsetreceivervolume; Usingthe Mute Button; Usingthe Redial Button - Uniden XC630 Operating Manual

~
NOTE
~
NOTE
If the noise persists, or a double beep is heard, move
closer to the base before pressing CHANNEL. If the noise
or interference continues, refer to the section entitled
"Trouble shooting" in this manual.
If you have more than one cordless phone in your house,
they must be set to different channels.
Using the Flash Button
Use FLASH to send a timed "hook-flash" on the telephone line for accessing
services such as call waiting, etc. To use this function, simply press the
FLASH button while operating the Handset.
Setting the Handset Receiver Volume
While on the phone call using the handset, press the VOLUME button to
select either loud or soft earpiece speaker volume.
Using the Mute Button
The MUTE Button allows you to put your call on hold. Note that while on
hold, a call is muted, i.e. you can hear the other party, but they cannot hear
you.
2.
Press the MUTE button on your handset. The TALK LED will flash at a
slow rate to indicate that the call is muted.
To resume the call, press the TALK or MUTE button. Doing this will
turn on the TALK LED and restore the connection, enabling you to
resume speaking.
1.
Using the Redial Button
REDIAL dials the last number that you have called. This function is extremely
useful when the number you called is busy. To use this function, simply press
REDIAL (while in TALK mode). The last number you called will then be
dialed again.
~
NOTE
20
If any other key is pressed before REDIAL, this function
will not work.