Lims Data Collection - MagCore Plus II Service Manual

━ LIMS Data Collection

There are two ways to get the data :
1. Get it via USB Flash Drive
2. Access Information through Internet
Connection.
1. Get Data from USB Flash Drive
Plug the USB Flash Drive into the instrument USB
Port.
Select Report
Select Save Data to save the data to the USB Flash
Drive. * Format USB Flash Drive to FAT32
2. Access to Information Through
Internet Connection
Obtaining data via internet connection. We
provide FTP protocol as a means of data
transmission. You can use any FTP client software.
Get the information FTP location information is as
follows:
Ftp:// instrument IP location (eg 192.168.3.155)
Username: uploadhis
Password: 111111
Open the Internet browser and enter the FTP
location and enter the username.
Select and download the data list and passwords.