Saved Settings; Access To Saved Settings - MagCore Plus II Service Manual

━ Saved Settings

If you need to save a customized setting, you can
save it here and use the predetermined parameters
for later uses.
After selecting the parameters, the confirmation
of your settings will be displayed. Press SAVE AS to
open the Saved Protocols page.
Select the parameters that you want to save shown
in the blue area. Saved Protocol option saves up to
six records.
Press Save Protocol to save the customized
parameters.
Press Back to confirm your settings.

━ Access to Saved Settings

After loading the Tips and Cartridges:
Press Saved Protocols on the start page
Select the parameters that you want to execute
shown in the blue area.
Press Start Protocol
Press Start after confirmation of your selected
parameters.