Bedford WS-1200mm Assembly Manual

IMPORTANT
Before commencing assembly:
 Follow all instructions COMPLETELY
 Hardware kit contains small parts; keep out
of reach of children.
 Ensure all listed parts are present.
 Required tools to assemble:
 Phillips head screw driver, Hammer & Wood
Glue (optional for extra strength).
 Required assembly work surface should
be solid, level, clean and flat.
 Ensure all melamine edges are facing to the
front of the unit.
 Two person assembly required.
 Do not stand the unit upright until the
back panel has been nailed on, otherwise,
the unit may collapse.
Detailed instructions are available by
visiting:
http://www.bedfordfurniture.com.au/
Customer Services Enquiries 1800 822 823
9.2.4.11
WS-1200mm 2 Door Robe
Revision 1
ASSEMBLY GUIDE
TP05-159