Advertisement
WS 3 Door Split Robe
IMPORTANT
Before commencing assembly:
• Follow all instructions COMPLETELY.
• Hardware kit contains small parts; keep out
of reach of children.
• Ensure all listed parts are present.
• Required tools to assemble:
Philips head screw driver, Battery Drill
& Spirit Level.
• Required assembly work surface should
be solid, level, clean and flat.
• Ensure all melamine edges are facing to the
front of the unit.
• Two person assembly required.
Customer Services Enquiries 1800 822 823
Controlled Document 9.2.4.11
ASSEMBLY GUIDE
Revision 5
TP05-151
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bedford WS 3
Summary of Contents for Bedford WS 3
- Page 1 ASSEMBLY GUIDE WS 3 Door Split Robe IMPORTANT Before commencing assembly: • Follow all instructions COMPLETELY. • Hardware kit contains small parts; keep out of reach of children. • Ensure all listed parts are present. • Required tools to assemble: Philips head screw driver, Battery Drill &...
- Page 2 Repeat for all doors Repeat for other end panel and division Controlled Document 9.2.4.11 Revision 5 TP05-151...
- Page 3 Controlled Document 9.2.4.11 Revision 5 TP05-151...
- Page 4 It is strongly recomended to secure the unit to the wall, otherwise, it may tip forward when opened empty. Bedford Furniture is part of the Bedford Group. Bedford is a South Australian not-for-profit organisation dedicated to enhancing the lives of people with a disability or disadvantage through employment, training, residential services and life-skills.
Need help?
Do you have a question about the WS 3 and is the answer not in the manual?
Questions and answers