Advertisement
Quick Links
IMPORTANT
Before Commencing Assembly:
• Read all instructions COMPLETELY
• Ensure all listed parts are present
If any parts are missing from Parts List 1, please
contact 1800 822 823.
If any parts are missing from Parts List 2, please
Contact HAFELE, Australia at 1300 559 387.
.
• Ensure you have the required tools to
complete the assembly
(Philips Head Screwdriver, Hammer &
Wood Glue)
CAUTION
• Ensure your work surface is solid, level,
clean and flat (DO NOT WORK ON
CARPET)
• Ensure ALL melamine edges are facing
as described in the Assembly Instructions.
IF YOU NEED TO CONTACT US WITH
REGARD TO THIS PRODUCT PLEASE CALL
1800 822 823 AND QUOTE THE BATCH
NUMBER SHOWN ON THE CARTON.
WARNING: Contains small parts, keep out
of reach of children.
615 Goodwood Road, Panorama SA 5041
PO Box 18 Melrose Park SA 5039
Telephone: 1800 822 823, Fax: (08) 8460 0009
Email: furniture@bedfordgroup.com.au
www.bedfordgroup.com.au
SAI Global
2 Door Robe Unit
Page 1 of 9
ASSEMBLY GUIDE
Advertisement
Related Manuals for Bedford 2 Door Robe Unit
Summary of Contents for Bedford 2 Door Robe Unit
- Page 1 ASSEMBLY GUIDE 2 Door Robe Unit IMPORTANT Before Commencing Assembly: • Read all instructions COMPLETELY • Ensure all listed parts are present If any parts are missing from Parts List 1, please contact 1800 822 823. If any parts are missing from Parts List 2, please Contact HAFELE, Australia at 1300 559 387.
- Page 2 Parts List 1 2 Door Robe Unit 1800 Description Part No. Description Qty. Part No. Qty. Cabinet End Fix Shelf/Top/Bottom 1672 Part No. Description Qty. Part No. Description Qty. Part No. Description Qty. Toe Rail Top Back Rail Door 1669 1350 Part No.
- Page 3 Parts List 2 2 Door Robe Unit Part No. Description Qty. Part No. Description Qty. Part No. Description Qty. Hinge Glides Hanging Rod Supports Part No. Description Qty. Part No. Description Qty. Screw Cams Hardware Pin Description Qty. Part No.
- Page 4 Step 1 Cabinet end panel Please lay left cabinet end panel (2) on a flat protected surface with holes facing up. Note that left and right end panels are reversible. Screw the hardware pins (16) in the holes shown. Assemble the right cabinet end (2) in mirror image to the left cabinet end (2).
- Page 5 Step 3 1 (Top) Fix Shelf, top and bottom Lay the top (1) on a flat surface with holes facing up and insert the cams (15) in holes with arrows pointing to the side of the top as shown. Please note that top, bottom and fix shelf are same. Make sure to push the cams (15) all the way in by gently taping them in with a hammer.
- Page 6 Step 6 Complete assembly without door It is recommended to insert Assembled Right Cabinet End small amount of glue in the dowel holes in the cabinet end and making sure, that, all the hardware pins and dowel holes in the right cabinet end align with the above assembly and edge strip faces toward the front...
- Page 7 Step 8 Attaching the plastic glides While unit is lying face down, attach the four glides (13) on the underside corners of the cabinet end panels. Step 9 Door assembly with the unit Caution: If the unit is not secured to the wall, it may tip forward, when, the cabinet is opened empty.
- Page 8 Step 10 Hinge adjustment Caution: The unit may tip forward when opened empty, if not secured to the wall. • Screw 1 is used for adjustment between cabinet end and door. • Screw 2 is used to secure hinge to end. •...
- Page 9 Bedford Furniture Employee – Nick Fuller Bedford Furniture is part of the Bedford Group. Bedford is a South Australian not-for-profit organisation dedicated to enhancing the lives of people with a disability or disadvantage through employment, training, residential services and life-skills.