Advertisement
IMPORTANT
Before commencing Assembly:
• Read all instructions COMPLETELY.
• Hardware kit contains small parts; keep out
of reach of children.
• Ensure all listed parts are present.
• Required tools to assemble:
Philips head screw driver, Hammer & Wood
Glue.
• Required assembly work surface should
be solid, level, clean and flat.
• Ensure all melamine edges are facing to the
front of the unit.
Customer Services Enquiries 1800 822 823
Controlled Document 9.2.4.11
HMR Solutions
2 Door Split Cabinet 600mm
Revision 2
ASSEMBLY GUIDE
TP05-145
Advertisement
Table of Contents
Related Manuals for Bedford HMR Solutions
Summary of Contents for Bedford HMR Solutions
- Page 1 ASSEMBLY GUIDE HMR Solutions 2 Door Split Cabinet 600mm IMPORTANT Before commencing Assembly: • Read all instructions COMPLETELY. • Hardware kit contains small parts; keep out of reach of children. • Ensure all listed parts are present. • Required tools to assemble: Philips head screw driver, Hammer &...
- Page 2 Controlled Document 9.2.4.11 Revision 2 TP05-145...
- Page 3 Controlled Document 9.2.4.11 Revision 2 TP05-145...
- Page 4 Caution Ensure cupboard is square before nailining back panel. Screw 2 Screw 1 • Screw 1 is used for adjustment • Screw 2 is used to secure hinge to The following instructions show how to adjust hinges if the gap between the doors is too wide.
Need help?
Do you have a question about the HMR Solutions and is the answer not in the manual?
Questions and answers