Advertisement
IMPORTANT
Before commencing Assembly:
• Read all instructions COMPLETELY.
• Hardware kit contains small parts; keep out
of reach of children.
• Ensure all listed parts are present.
• Required tools to assemble:
Philips head screw driver, Hammer & Wood
Glue.
• Required assembly work surface should
be solid, level, clean and flat.
• Ensure all melamine edges are facing to the
front of the unit.
Customer Services Enquiries 1800 822 823
Controlled Document 9.2.4.11
HMR Solutions
2 Door HMR Base Cabinet
Revivision 3
ASSEMBLY GUIDE
TP05-146
Advertisement
Table of Contents
Related Manuals for Bedford 2 Door HMR Base Cabinet
Summary of Contents for Bedford 2 Door HMR Base Cabinet
- Page 1 ASSEMBLY GUIDE HMR Solutions 2 Door HMR Base Cabinet IMPORTANT Before commencing Assembly: • Read all instructions COMPLETELY. • Hardware kit contains small parts; keep out of reach of children. • Ensure all listed parts are present. • Required tools to assemble: Philips head screw driver, Hammer &...
- Page 2 Controlled Document 9.2.4.11 Revivision 3 TP05-146...
- Page 3 Front Edge 58.50 Controlled Document 9.2.4.11 Revivision 3 TP05-146...
- Page 4 Screw 1 Screw 2 • Screw 1 is used for adjustment • Screw 2 is used to secure hinge to The following instructions show how to adjust hinges if the gap between the doors is too wide. Start from the top hinge. Loosen screw 2 by turning screw in an anti- clockwise direction.
Need help?
Do you have a question about the 2 Door HMR Base Cabinet and is the answer not in the manual?
Questions and answers