Mid-Roll Film Change - Canon ELPH Z3 Instructions Manual

Mid-roll Film Change

This camera supports the Film Cartridge Mid-roll
Change function, which is one of the major features of
the APS format.
If you reload a film cartridge that has been partly used,
this useful function automatically winds the film on to
the first unexposed frame so that you can continue
shooting from that point onwards. This function makes
it possible for you to swap around and shoot using
multiple film cartridges depending on factors such as
the subject, the type of shot, or the film speed.
To Remove an Unfinished Film Cartridge
Loading a Partially Used Film Cartridge
Partially used film cartridge
The time required to advance the film to the unexposed
frame is 15 to 40 seconds.
´-38
Refer to "Rewinding the Film
•
Cartridge in Mid-roll". (→ 13)
To load a partially used film
cartridge, use the
procedure described in
"Loading the Film
Cartridge".
\ The camera automatically
winds the film on to the first
unexposed frame.
(→ 10)