Replacing The Remote Control Battery - Canon ELPH Z3 Instructions Manual

• Remote control photography may not be possible if the
remote control sensor on the camera is exposed to
sunlight or strong fluorescent light. If this happens, use
the self-timer to take the picture or move the camera to
another location.
• The camera's remote control function may not operate
correctly if the camera is close to a fluorescent light
during signal reception. If this happens, move the
camera away from the fluorescent light.
• Remote control shots can be taken for the 4 minutes
that is displayed.
• Set the camera on a stable surface or use a tripod.

Replacing the Remote Control Battery

Replace the battery when you can no longer use the
remote control to take photos.
Battery: one CR2032 lithium battery
Shooting with Remote Control
Pull out the battery
holder.
• q Use a pen or other
pointed implement to push
2
in the release button w as
you slide the battery holder
1
out.
Load a new battery into
the holder and fit the
holder back into the
remote control.
• Ensure that the + and –
terminals are positioned
correctly.
2
´-27