Circuit Breaker; Seating - Bruno ELAN SRE-3050 Operator's Manual

CIRCUIT BREAKER and SEATING

CIRCUIT BREAKER

SEATING

seat
swivel
lever
©Bruno Independent Living Aids, Inc.
UP/DOWN
paddle control
seat
swivel
lever
®
The SRE-3050 includes a circuit breaker
with a built-in ON/OFF switch located on
the back side of the carriage.
The circuit breaker protects the battery,
controller and motor circuits in the stairlift
carriage.
It is unlikely that this circuit breaker will trip
during normal use. However, if the stairlift
becomes inoperative, check the circuit
breaker as a first troubleshooting step. Reset
it, if necessary.
Possible causes of circuit breaker tripping:
• foreign object jamming the rail or gear
rack;
• exceeding the rated weight capacity of
the stairlift.
The seat assembly on the SRE-3050 is
designed to swivel and to lock at 0, 67 and
90 degrees.
Pushing down on either side of the swivel
lever allows you to swivel the seat to a
convenient position for transferring into or
out of the seat.
Once you release the swivel lever, the seat
will lock at the next available position.
To lower the seat assembly from a folded
position to the riding position, simply push
down on the seat.
6
SRE-3050 OPERATOR 01 NOVEMBER 2019