Table of Contents
Advertisement
GENERAL SAFETY INSTRUCTIONS FOR
THE CHIPPER
!
DANGER!
•
Please make sure any machine operator has the re-
quired personal protective equipment: safety hel-
met, protective goggles, cut resistant safety boots
and required protective clothing.
•
The chipper must not be used without being
mounted to a tractor. It is prohibited to mount the
chipper to another power source.
•
It is not permitted to operate the chipper without
feed unit or feed hopper.
•
It is prohibited to manually load the material to be
cut into a feed unit designed for grab loader feed.
•
Indoor operation of the chipper is prohibited.
•
Always keep a safe distance to the discharge posi-
tion of the chips.
•
Detach the chipper from the tractor before perfor-
ming any maintenance or repair works. Caution! As
a sole exception, adjust the speed of the feed rol-
lers of the hydraulic feed with the machine running.
For further instructions, please see the instruction
manual of the feed unit concerned.
•
Do not remove, lock, disable or modify in any
other way the stop lever of the feed unit.
•
The feed hopper or the feed unit must not be
mounted at a higher or lower position as this would
impede the stop lever function.
Noise from the chipper exceeds
70 db in operation.
!
Wear ear protection!
CAUTION!
FARMI 381 HFC / HF
9
Advertisement
Table of Contents
