Starting Up The Chipper; Starting The Tractor Pto - Farmi 381 HFC Operation, Maintenance And Spare Parts Manual

STARTING UP THE CHIPPER

1. Connect the chipper's power plug. Connect the
hoses of the discharge pipe to the tractor hydrau-
lics.
2. Lift and lock the top of the discharge pipe in
place (1). Lift the discharge pipe to its operating
position (2). Ensure the parts are locked in place.
3. Start the chipper with the tractor running at low
rpm. Gradually bring the speed up to the level
required for chipping. (540 / 1000 rpm).
4. Move the discharge pipe by moving the lever left
or right. Adjust the lid position by moving the
lever (A) up or down.
5. The directional positioning of the discharge pipe
and the lid can only be performed while the
chipper is running.

STARTING THE TRACTOR PTO

Start the PTO in three steps:
1. Short start-up.
2. Even shorter start-up.
3. Let it rotate:
FARMI 381 HFC / HF
1
Locking the discharge pipe parts
21
1
1
2
2
2