Uniden ELBT 595 Series Owner's Manual page 55

note
During a line
conference with
LAND/MOBILE, mobile
transfer, flash,
dialing, CWDX,
phonebook/caller ID/
redial operations are
not available.
w w w . u n i d e n . c o m
From the base
1) Press corresponding soft key (LAND or MOBILE) on the base to join the
conference call.
2) To hang up, press end/find hs on the base. The handset(s) will still be connected
to the call.
From a second handset
1) Press corresponding soft key (LAND or MOBILE) on the handset to join the call.
2) To hang up, return the handset to the cradle, or press end on the handset. The
base or other handset will still be connected to the call.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base
join the call.
Conferencing two outside lines (LAND / MOBILE)
Follow the steps below to allow both outside lines to participate in a conference
call:
1) During a call, press back/hold/int'com, and then end or end/find hs on the base
to put the first caller on hold.
2) Press the line soft key (LAND or MOBILE) for a free line to make or answer a
second call.
3) When the second call is connected, press menu/select and select
to initiate a conference call.
4) To disconnect a single caller, press the corresponding soft key (LAND or MOBILE)
to place the caller you wish to keep speaking to on hold and then press end or
end/find hs to hang up the other caller.
Us i n g Y ou r Ph o ne [ 5 4 ]