Remote Operation - Uniden ELBT 595 Series Owner's Manual

Remote Operation

You can check, play, or delete messages when you are away from home. You can also
record your own greeting message. To access your answering machine remotely, you
need a touch tone telephone and a two-digit security code (see Setting a Security
Code on page 73).
1) Call your telephone number and wait for the system to answer. If Toll Saver is
enabled, answering machine will answer in 2 rings if you have new messages and
4 rings if you don't. If the answering machine is off, it will answer after about 10
rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering machine is
off), press 0 and enter your security code within two seconds.
3) The answering machine announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." Then, you'll hear a beep.
4) Enter a command from the following chart within 15 seconds. After the first
command, you have two seconds to enter each command.
[ 8 1 ] A n s we r in g M a c hi ne
note
•The system will only
play back messages for
four minutes, and then
it returns to the
command waiting
mode. To continue
playing your messages,
press 0 then 2 again
within 15 seconds.
•If you enter an
incorrect security code
three times, you will
hear a beep and the
system will return to
standby.
•For your convenience,
a remote operation
card is provided for
you to use while away
from home (refer to
page 100).
w w w . u n i d e n . c o m