Preparing The Phone For Use - Uniden EP200 Owner's Manual

Getting Started

Preparing the Phone for Use

Connect the Power
1. Plug one end of the AC Adapter into
the DC 13V In jack on the back of
your Email phone.
Use only the
Uniden AC Adapter
2. Wrap the power cord around the strain relief
supplied with this
notch in the base.
phone.
3. Plug the other end of the AC Adapter into
your wall outlet.
Connecting the Phone Line
1. Plug one end of the telephone
cord into the Line Jack on the
back of your Email phone.
2. Plug the other end of the
telephone cord into your wall jack.
Installing Additional Equipment
You can install additional equipment, such as an answering machine or
messaging system, by connecting it to the TEL Jack on the back of your
Email phone.
1. Plug one end of your telephone
cord into the TEL Jack on the back
of your Email phone.
2. Plug the other end of the telephone cord into the additional device, such as an
8
answering machine.
LINE TEL DC 13V IN
DC 13V IN
LINE TEL
LINE TEL DC 13V IN
LINE TEL DC 13V IN