Table of Contents
Advertisement
Storing Memory Numbers
Up to 10 numbers can be stored in the Handset for speed dialing when you are
away from the base. Numbers cannot be stored in the Base unit.
Note: These numbers will not be stored in the Address Book automatically. You
need to enter Address Book numbers separately.
1. Pick up the Handset and press mem . You will hear a beep and the talk/batt low
LED flashes.
2. Enter the number you want to store on the Handset keypad.
Note: You may enter a delay between numbers (for accessing a switchboard, or
long distance service) by pressing the redial/pause button on the Handset at the
point in the number sequence you wish to pause. The redial/pause button counts
as one digit. Pressing redial/pause more than once will increase the length of the
pause between numbers.
3. Press mem . You will hear another confirmation beep.
4. Enter a number ( 0-9 ) from the Handset keypad for the memory location.
Note: After pressing mem the second time, you have 20 seconds to enter the
number you wish to store. Otherwise, an error tone will sound and the unit returns
to Standby.
Erasing a Stored Number
1. On the Handset, press mem twice.
2. Enter the memory location number (0-9) you want to clear. You will hear a long
beep confirming the number is erased.
Dialing Memory Numbers
1. Press the talk key on the Handset.
2. Press the mem key on the Handset.
3. Enter the Memory Location Number (0-9).
Chain Dialing
1. Press the talk key on the Handset.
2. Press the mem key on the Handset.
3. Enter the Memory Location Number (0-9)
4. While on call, enter the number from the Handset
— OR —
Enter the memory location number where the second number is stored.
Using Your Phone
41
Advertisement
Table of Contents
