Uniden EP200 Owner's Manual page 12

Getting Started
Charging the Cordless Handset
Place the handset on the base to charge. The Charge message appears on the
LCD. See page 13 for details.
Note: The handset must be fully charged before the phone will operate properly.
The battery included with your phone is not charged.
Allow 12 to 15 hours for the Handset to charge.
During this time you can use the speaker phone
to make calls.
Low Battery Indicator
When the Battery Pack in the Handset
is low and needs to be charged, the
talk/batt low LED flashes every 3 seconds.
If this occurs while you are on the phone, you hear an alert tone. Complete your
call as quickly as possible, and return the Handset to the Base Unit for charging.
Allow 12 to 15 hours without any interruption for the Handset to fully recharge.
Cleaning the Battery Contacts
To maintain a good charge, it is
important to clean all battery
contacts on the Handset and Base
Unit about once a month. Use a
pencil eraser or other contact
cleaner. Do not use any liquids
or solvents.
10
talk
1
talk batt
talk
chan
1 2 3
abc def
4 ghi 5 jkl 6 mno
7 8 9
pqrs tuv wxyz
tone
0 #
oper
mem flash volume
ringer
redial/pause
Contacts
talk batt
chan
2 3
abc def