Memory Dialing; Storing Phone Numbers And Names In Memory Dial - Uniden DXI 986-2 Owner's Manual

In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the main
base, the phone will
return to standby mode
also.
[ 24 ] M E M O R Y D I A L I N G

Storing Phone Numbers and Names in Memory Dial

Memory Dialing allows you to dial a number using just a few key presses.
Your cordless phone stores up to 10 names/numbers in each handset.
1) Press the memory key in standby mode.
displayed.
2) Enter a number (0 - 9), or press the vol/ /
key to select the memory location where you would like to
store the number.
3) Press the memory or select/channel key.
4) Press the memory or select/channel key.
appears and a cursor flashes indicating that the display is
ready for the name to be entered.
If the Edit screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
to choose another location.
Go Back
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters" (see page 26).
• Use the #/ and
• Use the delete/transfer key to delete characters as needed.
• Press and hold the delete/transfer key to delete all the characters.
• If a name is not required, go to step 6.
Select Memory
Store Name
/tone/ keys to move the cursor to the desired location.
is
Select Memory
01
02 JOHN DOE
or vol/ /
01:(Empty)
Press Select
to edit
Store Name
Edit Memory01
Delete Memory01
Go Back
www.uniden.com