Register Handsets To Main Base Before Using - Uniden DXI 986-2 Owner's Manual

• When you charge the
handsets, Caller ID
summary screen and
the name of the
handset, HS1
appears. If HS2
appears, you are
charging the handset
No. 2.
HS1
New :01
Total:02
• The charging cradle
can be used to
charge either
handset.
[ 14 ] G E T T I N G S T A R T E D

Register Handsets to Main Base Before Using!

When handsets are removed from the packaging, install batteries and fully charge for
15-20 hours.
The handset YOU CHOOSE (does not matter which handset) to place in the main base
to charge, will automatically be registered to that main base.
The second handset (charging in the extra charging cradle), MUST also be registered
to the main base before use. Follow the steps below to registered the second
handset.
Follow these simple steps to register:
1) First, install the battery packs in both handsets. Place either handset in the main
base, then place the second handset in the charging cradle. Charge both handsets
for 15-20 hours.
2) After fully charging both handsets, remove the handset in the charging cradle,
and place it in the main base. The charge/in use LED light on the main base will
begin to flash, indicating that the registration is taking place between the
second handset and the main base.
3) Wait for at least 5 seconds before removing the handset from the main base.
Congratulations, the registration has been completed, and your dual handset
cordless phones are ready for use!
www.uniden.com