Table of Contents
Advertisement
Step 1 Checking the Package Contents
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
• Main base unit (1)
Uniden Parts Department
• Handset (2)
at (800) 554-3988
• Charging cradle (1)
Hours: M-F 8:00 a.m. to
• AC adapter (2)
5:00 p.m. CST.
• Rechargeable battery (2)
or visit our website at
• Telephone cord (1)
www.uniden.com for
• Beltclip (2)
replacement parts.
• This owner's manual (1)
• Other printed material (1)
Step 2 Install and Charge the Handset Batteries
TO INSTALL THE HANDSET BATTERIES
(see page 10 for details)
Charge the handset battery packs for at least
15-20 hours before using your new cordless
telephones for the first time!
Remove the cover.
Use only the Uniden
A
rechargeable battery
packs supplied with your
new phones!
Connect the battery Pack
B
connector with the
correct polarity.
C
Replace the cover.
www.uniden.com
Plug each AC adapter cord into each charging
cradle and then into each 120V AC outlet.
D
Use only the Uniden AC adapters supplied
with your new phones!
Place the handset in the main base and
E
place the other handset in the charging
cradle, and then charge continuously for
15 - 20 hours before using the phone.
Step 3 Connect to Phone Line
When the handset battery packs are
fully charged, after 15-20 hours of
charging, plug the telephone cord
into the main base unit and then
into a telephone wall jack.
Your phones are set for tone dialing. If your local
network requires pulse dialing, please see
"Choosing the dialing mode" on page 18.
Step 4 Register 2nd Handset to Main Base
After fully charging both handsets, remove
the second handset from the extra
A
charging cradle and place in the main base
unit. The main base LED light will flash
indicating registration is occurring.
Wait for at least 5 seconds before removing
B
handset. Once registration is complete, the
cordless phone is ready for use.
Step 5 Setting Menu Display Options
Note: There are five setup
options available. They are
Caller ID options (AutoTalk,
CIDCW [Caller ID on Call
Waiting], Area Code), Dial
Mode and Language
(see page 16 for details).
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
Press and hold the caller id/menu key in
A
standby mode.
Press the vol/
B
move the pointer to an option.
Press the select/channel key to change the
C
option setting.
Press the end key to exit, and return the
D
handset to the main base.
OPTIONS INCLUDE
A
Auto Talk
On/Off
CIDCW
On/Off
B
(Caller ID on Call Waiting)
C
Area Code
Enter/Remove
D
Dial
Pulse/Tone
E
Language
English/French/Spanish
Q U I C K R E F E R E N C E G U I D E
/
or vol/
/
key to
[ 3 ]
Advertisement
Table of Contents
