Changing The Volume; Staying In The Range - Uniden XDECT 8355 Series Owner's Manual

Changing the Volume

To change the...
earpiece volume for
each handset
speaker volume
ringer volume (If you
turn the ringer all
the way down, that
particular ringer turns
off.)

Staying in the Range

Your system will alert you when you are out of range (or about to go out of
range).
If...
the handset and base are
connected and no signal from
the base
the handset is in Talk mode and
moves out of range
the handset and base are in
standby mode and the handset
does not get a signal from the
base
audio deteriorates
you are trying to go off-hook
you are trying to go on-hook
When...
you are listening to that
earpiece or speaker
(playing messages,
etc.)
The phone is in
standby.
Then...
the handset sounds an error tone and
Out of Range or Unavailable at this
time displays.
the outside line is put on Hold for 30
seconds and then dropped. The LCD
alternately displays Out of Range and
Check Base Power.
the LCD alternately displays Out of
Range and Check Base Power.
the handset sounds an error tone. The
LCD alternately displays End of Range
and Move toward base.
call data displays and then an error
tone sounds. The LCD alternately
displays Unavailable at this time.
END displays.
Press...
UP to increase the
volume.
to decrease it.
DOWN
29