Summary of Contents for Better Homes and Gardens Ashwood Road 2-pk Dining Chairs BH12-093-001-12
Page 1
LOT NUMBER: DATE PURCHASED: / Ashwood Road 2-pk Dining Chairs Stock # BH12-093-001-12 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m.
Model # BH12-093-001-12 QUALITY GUARANTEE We are confident that you will be delighted with your Whalen Furniture purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations.
Page 3
Model # BH12-093-001-12 Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- CHAIR BACKREST (2) B- SEAT FRAME (2) C- SEAT BOARD (2) D- FRONT LEG (4) (1) M6 x 35 mm BOLT (4+1 extra) (2) M6 x 60 mm BOLT (8+1 extra) (3) M6 x 75 mm BOLT...
Model # BH12-093-001-12 Assembly Instructions ① BOLT M6 x 35 mm (2 used in this step) ③ BOLT M6 x 75 mm (4 used in this step) LOCK WASHER (6 used in this step) ④ FLAT WASHER (6 used in this step) ⑤...
Page 5
Model # BH12-093-001-12 Assembly Instructions FLAT WASHER LOCK WASHER ② BOLT M6 x 60 mm (4 used in this step) (4 used in this step) (4 used in this step) ⑤ ④ 5. Attach two FRONT LEGS (D) to the front corner blocks of SEAT FRAME (B) by inserting M6 x 60 mm BOLTS (2) with WASHERS (4 and 5) through the pre-drilled holes on corner blocks into the threaded inserts on FRONT LEGS.
Page 6
Model # BH12-093-001-12 Assembly Instructions SCREW M4 x 38 mm ⑥ (5 used in this step) 7. Flip assembled chair upside down and attach to the bottom of SEAT BOARD (C) making sure it is centered properly. Secure the SEAT BOARD in place by inserting five M4 x 38 mm Screws (6) into the countersunk holes on SEAT FRAME (B).
Model # BH12-093-001-12 Care and Maintenance From time to time please ensure there are no loose nuts on the product. Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.