Summary of Contents for Better Homes and Gardens Mercer Twin Complete Bed BH17-084-099-34
Page 1
LOT NUMBER: DATE OF PURCHASE: / / Mercer Twin Complete Bed Model # BH17-084-099-34 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 866-942-5362 Pacific Standard Time: 8:30 a.m.
Page 2
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Headboard (Qty. 1) B- Footboard (Qty. 1) C- Mattress Side Rail (Qty. 2) D- Mattress Side Rail (Qty. 2) E- Mattress Support Slat (Qty.
Page 3
Assembly Instructions 1/4" x 1-1/8” Bolt (8 used in this step) ② 1. Unpack the units and confirm that you have all hardware and required parts. 2. Attach one Side Rail Support (F) to the joint between the Mattress Side Rails (C and D) with four 1-1/8”...
Page 4
Assembly Instructions 1/4" x 1/2” Bolt 1/4" x 3” Bolt ③ (4 used in this step) (4 used in this step) ① 4. Align and attach the assembled Mattress Side Rails (C and D) between the Headboard and Footboard (A and B) with four 1/2” Bolts (1) as shown. 5.
Page 5
Assembly Instructions 1/4" x 1-1/8” Bolt (14 used in this step) ② 6. Fasten seven Mattress Support Slats (E) between the Side Rails (C and D) with the 1-1/8” Bolts (2).
Care and Maintenance For everyday cleaning, chrome, brass, aluminum, and painted metal surfaces can be kept looking their best by wiping with a slightly damp, soft cotton cloth or vacuum cleaner brush. If soiled, wipe with clean sponge or cloth wrung out of water. Wipe dry with cloth or paper towel to avoid water spots.
Page 7
NÚMERO de LOTE: FECHA de COMPRA: / / Cama completa individual Mercer Modelo # BH17-084-099-34 ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compró. Por favor llame a nuestro departamento de ayuda al cliente teniendo su instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica: 866-942-5362 Hora Estándar del Pacífico: 8:30 am - 4:30 pm, de Lunes - Viernes...
Page 8
Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes antes de iniciar el ensamblado. A- Cabecera (Cant. 1) B- Piecera (Cant. 1) C- Riel lateral del colchón (Cant. 2) D- Riel lateral del colchón (Cant.
Page 9
Instructivo de ensamble Tornillo de 1/4" x 1-1/8” usados en este paso ② 1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas. 2. Adjuntar un soporte del riel lateral (F) a la union entre los rieles laterales del colchón (C y D) con 4 tornillos de 1-1/8”...
Page 10
Instructivo de ensamble Tornillo de 1/4" x 1/2” Tornillo de 1/4" x 3” ③ usados en este paso usados en este paso ① 4. Alinear y adjuntar los rieles laterales del colchón ensamblados (C y D) entre la cabecera y piecera (A y B) con 4 tornillos de 1/2”...
Page 11
Instructivo de ensamble Tornillo de 1/4" x 1-1/8” usados en este paso ② 6. Sujetar 7 tablas de soporte del colchón (E) entre los rieles laterales (C y D) con los tornillos de 1-1/8” (2).
Mantenimiento y cuidados Para una limpieza diaria, las superficies de cromo, bronce, aluminio y de metal pintado se mantienen mejor limpiándolas con un trapo de algodón suave, levemente humedecido, un sacudidor o con el cepillo de la aspiradora. Si hay manchas límpielas con una esponja o con un trapo limpio húmedo (exprimido). Seque completamente con un trapo o una toalla de papel para evitar manchas de agua.