Getting Your Messages - Uniden DECT2180 Series User Manual

Record Time
Message Alert
Ans. Language Change the language of the system's voice prompts.
Call Screen
Ans. On/off

Getting Your Messages

Accessing your answering system from a handset
You can access your system from a handset whenever the phone is
in standby.
1:Repeat 1:Repeat
2:Play 2:Play
Use Use
PHONEBOOK/ PHONEBOOK/
to go to the to go to the
LEFT LEFT
previous option. previous option.
During remote operation, the phone beeps to let you know it's

waiting for your next command.
You can press the number key next to the commands instead of

scrolling through them.
If you don't press any keys for 30 seconds, the phone returns to

standby.
Only one handset can access the system at a time.

Set the amount of time callers have to leave a message,
either 1 minute or 4 minutes. Choose Announce Only if
you don't want the system to let callers to leave a message.
Have the system beep every 15 seconds when you have
a new message; the beeping stops when you listen to all
your new messages. (To mute the alert without listening to
your messages, press any key on the base.)
Turn on the call screen feature so you can hear callers as
they leave messages on the base speaker (see page 20).
Turn your answering system on or off. (To turn your
system on or off from the base, just press
3:Skip 3:Skip
5:Stop 5:Stop
4:Delete 4:Delete
Press Press to exit remote to exit remote
END END
operation mode. operation mode.
Press Press
MESSAGES/MUTE MESSAGES/MUTE
remote operation mode. remote operation mode.
[ / /select] [ / /select]
.)
ON
to start to start
6:SelectGreeting 6:SelectGreeting
8:RecNewGreeting 8:RecNewGreeting
Use Use
CALLER ID/ CALLER ID/
to go to the to go to the
RIGHT RIGHT
next option. next option.
Press Press
MENU/ MENU/
to choose to choose
SELECT SELECT
the current option. the current option.