Using Your Phone; Using The Base Speakerphone; Changing The Volume - Uniden DECT2180 Series User Manual

To...
make a call: Dial the
number, then
answer a call
hang up
switch between the
speaker & earpiece
mute the microphone
during a call
put a call on hold
return to a call on hold Press
mute the ringer for this
call only

Using the Base Speakerphone

The base speakerphone lets you use the following features:
Answer a call
Hang up
Put a call on hold
Return to a call on hold

Changing the Volume

You can set the volume of the ringer and speaker separately for the
base and each handset; you can also set the earpiece volume on
each handset. For each item, press
make it softer. The available volume levels and how change them are
listed below:
Change the When
ringer the phone is in
volume standby
0

Using Your Phone

From the handset From the handset speakerphone
Press
TALK/FLASH
Press
TALK/FLASH
Press or put the handset in the cradle.
END
Press
SPEAKEr
Press
MESSAGES/MUTE
microphone back on.
Press
CLEAr/INTErCOM
call will be disconnected.
TALK/FLASH
While the phone is ringing, press
Press
SPEAKEr
Press
SPEAKEr
Press
FIND HANDSET/INTErCOM
Press
SPEAKEr
On the base
select Off, Low,
Medium, or High
. Press
SPEAKEr
. Press
SPEAKEr
.
. Press again to turn the
. After 5 minutes on hold, the
. Press
SPEAKEr
.
.
.
to make it louder or
Up
.
.
.
.
MESSAGES/MUTE
twice.
to
doWN
On a handset
select Off, Low,
Medium, or High