Installing.the.battery - Uniden DECT2080 Series User Manual

Installing the Battery
Use.only.the.Uniden.BT-008.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Follow.the.steps.below.to.install.the.handset.battery.
) Press in on the handset battery case cover (use the finger
indention.for.a.better.grip).and.slide.the.cover.downward.
to.remove.
2) Plug.the.battery.cable.into.the.battery.jack..Be.sure.to.
match.the.red.and.black.wires.to.the.label.near.the.jack..
The.cable.should.snap.into.place..Gently.pull.on.the.
battery.cable..If.the.battery.connector.comes.loose,.try.
connecting.again.until.the.battery.snaps.into.place.
3) Place.the.battery.case.cover.back.on.the.handset.and.
slide.it.upwards.until.it.clicks.into.place..
3