Adjusting.the.audio.tone; Finding A Lost Handset; Using Hold, Conference And Transfer; Placing.a.call.on.hold - Uniden DECT2080 Series User Manual

Adjusting the Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
) While.on.a.call,.press.[Menu/Select].
2) Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.[Menu/Select].
3) Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.
[Menu/Select]..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.

Finding a Lost Handset

To.locate.a.misplaced.handset,.press.[find hs].on.the.base.when.the.phone.is.in.standby..The.handsets.connected.
to.the.paging.base.will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.
[find hs].again.or.any.key.on.the.found.handset.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.

Using Hold, Conference and Transfer

Placing a Call on Hold
) During.a.call,.press.[Clear/Int'com].on.the.handset.to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.
more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
2) To.return.to.the.party.on.hold,.press.[ /Flash].or.[
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party's line will be
disconnected.and.the.phone.will.return.to.standby.
. •.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
].on.a.handset..The.phone.will.return.to.the.holding.party.
33