Troubleshooting; Resetting.the.handset - Uniden DECT2080 Series User Manual

Troubleshooting

Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as."Handset.#4".but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden's.call.center.representatives.
) Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.Base.on.page.2).
2) Press.and.hold.[ ].and.[#] for more than five seconds. Select DEREGISTER HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.[Menu/Select].
4) The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.HANDSET.NOT.REGISTERED-PLACE.HANDSET.
ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP.
6) Re-register.the.handset.to.the.base.(see.Registering.Accessory.Handsets.on.page.20)..
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.the.next.section).
48