Installing The Battery - Uniden TRU9380 User Manual
Cordless phone system with digital answering system and call waiting/caller id
Hide thumbs
Also See for TRU9380:
- Owner's manual (72 pages) ,
- Manual d'utilisation (76 pages) ,
- Manual d'utilisation (76 pages)
Table of Contents
Advertisement
3.
Wrap the AC adapter cord inside the molded wiring channel as shown.
4.
Plug the AC adapter into a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch.
5.
Plug the telephone line cord into the TEL LINE jack.
6.
Plug the telephone cord into the telephone jack.
7.
Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone
Installing the Battery
Follow the steps below to install the handset battery.
1.
downward to remove.
2.
Place the battery pack in the battery compartment with the connectors on the battery and on the compartment
aligned.
3.
Place the battery case cover back on the handset and slide it upwards until it clicks into place.
Note: Use only the Uniden BT-1004 rechargeable battery pack supplied with your cordless telephone.
13
Advertisement
Table of Contents
