Sas 3.0 Ports And Cpld Jtag Header; Sas Ports; Cpld Jtag Header - Supermicro AOC-S3108L-H8iR User Manual

AOC-S3108L-H8iR User's Guide
2-3

SAS 3.0 Ports and CPLD JTAG Header

SAS Ports

Eight SAS ports, supported by the Avago 3108 SAS controller, are located on the
add-on card. SAS 0-3 and SAS 4-7 support SAS 3.0 connections. See the table
below for pin definitions.

CPLD JTAG Header

A 6-pin CPLD JTAG header, located at JP8, is used to scan complex-programma-
ble logic devices. Connect a cable to JP8 for CPLD JTAG scan to enhance system
security and data integrity. See the layout below for the location.
J1
SAS 3.0
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
BAR CODE
SAS Controller
SAS CODE
AOC-S3108L-H8iR
PCI-E 3.0 x8
Rev. 1.02
2
1
J5
BUZZER1
JP6
J2
JP8
3
2-2
1. SAS Ports 0~3
2. SAS Ports 4~7
3. CPLD JTAG Scan