Supermicro AOC-S3108L-H8iR User Manual page 23

Chapter 4: Configuring the Avago MegaRAID Setting
Move the cursor to select the controller and press <F2>, as shown below. Press
<Enter> to create new virtual drives when the following screen displays.
Note You can use the up arrow and down Arrow keys here to select enabled com-
mands, which are highlighted in white, such as "Create Virtual Drive" or "Clear
Configuration".
Press <Enter> for the RAID level selection when the screen below shows. This
screen also allows you to select parameters of the new virtual drive using the up
arrow, down arrow, or <Tab> keys.
4-5