Installation Procedure
1. Push up the sunshade
until the spring fastener
is stuck gently.
4. (Optional) Install signal cables for non-PoE cameras.
Bullet camera 1
Bullet camera 2
Bullet camera 3
6. (Optional) Install the door status sensor.
2. Open the maintenance
compartment door.
Dome camera
3. Install cables for PoE cameras.
Bullet camera 1
Bullet camera 2
Bullet camera 3
5. (Optional) Install power cables for non-PoE cameras.
The power cable for the dome camera can only be connected to
the 24VAC port.
Use waterproof tape to protect the cable distribution terminal
and put it inside the pole.
Cable distribution terminal
Bullet camera 3
7. (Optional) Install the dome camera alarm linkage cable.
9
Cables for the dome
camera can only be
connected to the
PoE++ 0–1 ports.
Dome camera
Dome camera
Bullet camera 1
Bullet camera 2
Dome camera
alarm cable