Remove The Solid-State Drive (Ssd) - Lenovo Legion 7 Series Hardware Maintenance Manual

Remove the solid-state drive (SSD)

Make sure the following FRU (or CRU) have been removed.
"Remove the lower case" on page 30
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw.
Figure 6. Remove one screw
Screw specifications
M2 x L3
Step 3. Remove the SSD by pulling it away from the slot.
Figure 7. Remove the SSD
Note: For LCD panel with the factory color calibration feature, do the following to install new color profiles:
1. Go to
https://pcsupport.lenovo.com/us/en/downloads/DS543953
Double-click the EXE file and follow the on-screen instructions to finish the installation.
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to restore the
profile from Lenovo cloud.
Go to https://support.lenovo.com/partslookup
part:
SSD
32
Hardware Maintenance Manual
Number of screws
1
to download the installation software.
to look up the Lenovo part number of the following replacement