Remove the Wi-Fi card
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the thermal module" on page 33
Step 1.
Remove the mylar strip.
Figure 10. Remove the mylar strip
Step 2.
Detach the main and auxiliary antenna cable connectors. Remove one screw and then remove the
Wi-Fi card by pulling it away from the slot.
Figure 11. Remove the Wi-Fi card
Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
part:
Wi-Fi card
34
Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part number of the following replacement